Jump to content
securitybreach

My systems' configs

Recommended Posts

securitybreach

Here are the specs of my current machines:

 

 

Desktop: 9fI3NuB.png Server 1: aIRdjzb.png Server 2: xiLKLMT.png

 

Linode VPS: lqFylLY.png Workstation Laptop: ACSn4W4.png Main carry laptop: 43UHkmw.png

 

I have a few other systems but these are the ones that currently get used.

  • Like 3

Share this post


Link to post
Share on other sites
V.T. Eric Layton

Spiffy!

 

vtel57@ericsbane07~:$ inxi -F
System:    Host: ericsbane07.3108.net Kernel: 3.10.107 x86_64 (64 bit)
	   Desktop: Xfce 4.10.2 Distro: Slackware 14.1
Machine:   Mobo: Gigabyte model: GA-890FXA-UD5 v: x.x
	   Bios: Award v: F6 date: 11/24/2010
CPU:	   Hexa core AMD Phenom II X6 1090T (-MCP-) cache: 3072 KB
	   clock speeds: max: 3200 MHz 1: 3200 MHz 2: 3200 MHz 3: 3200 MHz
	   4: 3200 MHz 5: 3200 MHz 6: 3200 MHz
Graphics:  Card: NVIDIA GF114 [GeForce GTX 560]
	   Display Server: X.Org 1.14.3 driver: nvidia
	   Resolution: 1680x1050@59.9hz
	   GLX Renderer: N/A GLX Version: N/A
Audio:	 Card-1 AMD/ATI [Advanced Micro Devices ] SBx00 Azalia (Intel HDA)
	   driver: snd_hda_intel
	   Card-2 NVIDIA GF114 HDMI Audio Controller driver: snd_hda_intel
	   Sound: Advanced Linux Sound Architecture v: k3.10.107
Network:   Card: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller
	   driver: r8169
	   IF: eth0 state: up speed: 1000 Mbps duplex: full
	   mac: 1c:6f:65:c0:ce:24
Drives:    HDD Total Size: 1640.4GB (7.8% used)
	   ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
	   ID-2: /dev/sdc model: WDC_WD3200KS size: 320.1GB
	   ID-3: /dev/sdd model: WDC_WD3200AAKS size: 320.1GB
	   ID-4: /dev/sdb model: MAXTOR_STM350063 size: 500.1GB
Partition: ID-1: / size: 48G used: 9.1G (20%) fs: ext4 dev: /dev/sda1
	   ID-2: /home size: 96G used: 17G (19%) fs: ext4 dev: /dev/sda2
	   ID-3: swap-1 size: 7.24GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
	   ID-4: swap-2 size: 7.24GB used: 0.00GB (0%) fs: swap dev: /dev/sdb4
RAID:	  No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 33.2C mobo: N/A gpu: 40C
	   Fan Speeds (in rpm): cpu: N/A
Info:	  Processes: 202 Uptime: 40 min Memory: 1249.9/11921.9MB
	   Client: Shell (bash) inxi: 2.2.31

Share this post


Link to post
Share on other sites
securitybreach

Nice, btw there are tons of switches. For instance, inixi -D shows you harddrive specs, -N network, -G graphics, etc.

 

WbjBcm2.png

  • Like 1

Share this post


Link to post
Share on other sites
securitybreach

inxi -m is nice too as it will show you the available ram, which slot it is in and how much your system can hold:

 

cotA6ec.png

  • Like 1

Share this post


Link to post
Share on other sites
raymac46

It works with virtual machines too.

 

ray@ray-VirtualBox:~$ inxi -Fxz
System:    Host: ray-VirtualBox Kernel: 4.15.0-32-generic x86_64
	   bits: 64 gcc: 7.3.0
	   Desktop: Gnome 3.28.2 (Gtk 3.22.30-1ubuntu1)
	   Distro: Ubuntu 18.04.1 LTS
Machine:   Device: oracle System: innotek product: VirtualBox v: 1.2 serial: N/A
	   Mobo: Oracle model: VirtualBox v: 1.2 serial: N/A
	   BIOS: innotek v: VirtualBox date: 12/01/2006
CPU:	   Dual core Intel Core i5-2320 (-MCP-)
	   arch: Sandy Bridge rev.7 cache: 6144 KB
	   flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3) bmips: 11972
	   clock speeds: max: 2993 MHz 1: 2993 MHz 2: 2993 MHz
Graphics:  Card: InnoTek Systemberatung VirtualBox Graphics Adapter
	   bus-ID: 00:02.0
	   Display Server: x11 (X.Org 1.19.6 ) driver: vboxvideo
	   Resolution: 1920x975@59.96hz
	   OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
	   version: 3.3 Mesa 18.0.5 Direct Render: Yes
Audio:	 Card Intel 82801AA AC'97 Audio Controller
	   driver: snd_intel8x0 ports: d100 d200 bus-ID: 00:05.0
	   Sound: Advanced Linux Sound Architecture v: k4.15.0-32-generic
Network:   Card: Intel 82540EM Gigabit Ethernet Controller
	   driver: e1000 v: 7.3.21-k8-NAPI port: d010 bus-ID: 00:03.0
	   IF: enp0s3 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 21.6GB (31.9% used)
	   ID-1: /dev/sda model: VBOX_HARDDISK size: 21.6GB
Partition: ID-1: / size: 20G used: 6.5G (35%) fs: ext4 dev: /dev/sda1
RAID:	  No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:	  Processes: 187 Uptime: 1 min Memory: 891.5/1993.3MB
	   Init: systemd runlevel: 5 Gcc sys: N/A
	   Client: Shell (bash 4.4.191) inxi: 2.3.56
ray@ray-VirtualBox:~$

  • Like 3

Share this post


Link to post
Share on other sites
saturnian

It works with virtual machines too.

 

Wow, that's interesting, and good to know!

 

Yeah, its been around for many years now.

 

Yep. I've been adding inxi here for a long time now, except for with a few distros that ship it by default.

 

I'm a little too embarrassed to show the inxi -F output for my lame machines...

 

securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! :)

Share this post


Link to post
Share on other sites
securitybreach

securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! :)

 

What's wrong with Cerberus (main rig) and Darkstar (the VPS)??? ;)

Share this post


Link to post
Share on other sites
saturnian

Sorry, didn't notice those because the images didn't load, had to click to see those two.

 

Wow, I'm currently running Linux on six different machines, too!

 

I prefer to use inxi -b most of the time. This is from the machine I'm typing from right now -- I have Arch and Debian Stable living on this one (I use either Openbox, LXDE, or Xfce in the Arch installation, and either Openbox or Fluxbox in the Debian installation):

 

$ inxi -b
System:	Host: steve Kernel: 4.18.1-arch1-1-ARCH x86_64 bits: 64 Desktop: Openbox 3.6.1
	 Distro: Arch Linux
Machine: Type: Laptop System: Hewlett-Packard product: Presario CQ56 Notebook PC
	 v: 0595110003202810010020100 serial: <root required>
	 Mobo: Hewlett-Packard model: 1605 v: 90.16 serial: <root required>
	 BIOS: Hewlett-Packard v: F.13 date: 11/23/2010
Battery: ID-1: BAT0 charge: 38.4 Wh condition: 38.4/38.4 Wh (100%)
CPU:	 Single Core: Intel Celeron 900 type: MCP speed: 2191 MHz
Graphics: Card-1: Intel Mobile 4 Series Integrated Graphics driver: i915 v: kernel
	 Display: x11 server: X.Org 1.20.1 driver: intel unloaded: modesetting
	 resolution: 1366x768~60Hz
	 OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express v: 2.1 Mesa 18.1.6
Network: Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
	 Card-2: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169
Drives:	Local Storage: total: 240.29 GiB used: 11.03 GiB (4.6%)
Info:	 Processes: 114 Uptime: 6h 12m Memory: 1.88 GiB used: 889.5 MiB (46.1%) Shell: bash
	 inxi: 3.0.20

  • Like 1

Share this post


Link to post
Share on other sites
securitybreach

Nice :thumbsup:

Share this post


Link to post
Share on other sites
abarbarian

[longship@09:45:37 ~]$ inxi -D -v 6
System:
 Host: longship Kernel: 4.17.14-arch1-1-ARCH x86_64 bits: 64 compiler: gcc
 v: 8.2.0 Desktop: N/A wm: WindowMaker dm: startx Distro: Arch Linux
Machine:
 Type: Desktop System: Gigabyte product: N/A v: N/A serial: <root required>
 Mobo: Gigabyte model: Z170X-Gaming 7 v: x.x serial: <root required>
 UEFI: American Megatrends v: F6 date: 12/16/2015
Memory:
 RAM Report: permissions: Unable to run dmidecode. Are you root?
CPU:
 Topology: Quad Core model: Intel Core i7-6700K bits: 64 type: MT MCP
 arch: Skylake-S rev: 3 L2 cache: 8192 KiB
 flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 64152
 Speed: 4200 MHz min/max: 800/4200 MHz Core speeds (MHz): 1: 4200 2: 4201
 3: 4200 4: 4200 5: 4198 6: 4200 7: 4201 8: 4199
Graphics:
 Card-1: NVIDIA GP104 [GeForce GTX 1070] driver: nvidia v: 396.51
 bus ID: 01:00.0 chip ID: 10de:1b81
 Display: server: X.Org 1.20.0 driver: nvidia
 resolution: 1920x1200~60Hz, 1920x1080~50Hz
 OpenGL: renderer: GeForce GTX 1070/PCIe/SSE2 v: 4.6.0 NVIDIA 396.51
 direct render: Yes
Audio:
 Card-1: Intel Sunrise Point-H HD Audio driver: snd_hda_intel v: kernel
 bus ID: 00:1f.3 chip ID: 8086:a170
 Card-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel v: kernel
 bus ID: 01:00.1 chip ID: 10de:10f0
 Sound Server: ALSA v: k4.17.14-arch1-1-ARCH
Network:
 Card-1: Intel Ethernet I219-V driver: e1000e v: 3.2.6-k port: N/A
 bus ID: 00:1f.6 chip ID: 8086:15b8
 IF: enp0s31f6 state: up speed: 100 Mbps duplex: full
 mac: 40:8d:5c:e0:e4:aa
 Card-2: Qualcomm Atheros Killer E2400 Gigabit Ethernet driver: alx
 v: kernel port: c000 bus ID: 05:00 chip ID: 1969:e0a1
 IF: enp5s0 state: down mac: 40:8d:5c:e0:e4:ac
Drives:
 Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
 ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
 size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 serial: S1XWNYAG908281
 ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
 speed: 6.0 Gb/s serial: 15230FBC4849 temp: 34 C
 ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
 speed: 6.0 Gb/s serial: MK140221AS1269223 temp: 31 C
 ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
 speed: 6.0 Gb/s serial: S3Z2NB0K369918E
 ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB
 serial: SN0050600227
 Message: No Optical or Floppy data was found.
Partition:
 ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4
 dev: /dev/nvme0n1p4 label: ArchRoot
 uuid: facb8acb-8d5d-4d91-8630-31a781a95d44
 ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat
 dev: /dev/nvme0n1p1 label: SYSTEM uuid: 681C-17E0
 ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4
 dev: /dev/nvme0n1p5 label: Anarchy
 uuid: 2276168e-072b-4266-9ccf-3f9f425b630c
 ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4
 dev: /dev/sdc2 label: ASteam uuid: 74fde71c-30ba-4f96-8b92-5ad5d592cf59
 ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap
 dev: /dev/nvme0n1p7 label: swap uuid: de1de544-0ddc-4be8-9712-133d46becf49
Unmounted:
 ID-1: /dev/nvme0n1p2 size: 128.0 MiB fs: <root required> label: N/A
 uuid: N/A
 ID-2: /dev/nvme0n1p3 size: 117.19 GiB fs: ntfs label: Windows7
 uuid: 5832090D3208F234
 ID-3: /dev/sda3 size: 232.66 GiB fs: ntfs label: Steam-D
 uuid: 92DA57F2DA57D159
 ID-4: /dev/sdb1 size: 223.57 GiB fs: ntfs label: Steam-E
 uuid: A8DEB8B6DEB87E5E
 ID-5: /dev/sdc1 size: 244.14 GiB fs: ntfs label: SSteam
 uuid: 6DB22EBD6D0B4E54
 ID-6: /dev/sde1 size: 582.0 MiB fs: iso9660 label: ALT p8 wmaker/x86_64
 uuid: 2018-03-12-08-47-10-00
 ID-7: /dev/sde2 size: 37.9 MiB fs: vfat label: El Torito uuid: E8CB-BCC6
 ID-8: /dev/sde3 size: 6.88 GiB fs: ext4 label: alt-live-storage
 uuid: 6c462286-5b2d-4bca-a310-81e5b3610950
USB:
 Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
 Hub: 1:2 usb: 2.1 type: Hitachi Full speed (or root) hub
 chip ID: 045b:0209
 Device-1: Cooler Master bus ID: 1:3 usb: 2.0 type: Mouse
 chip ID: 2516:001e
 Device-2: Keyboard bus ID: 1:5 usb: 2.0 type: Keyboard chip ID: 28de:1142 
Hub: 2:1 usb: 3.0 type: Full speed (or root) hub chip ID: 1d6b:0003
 Hub: 2:2 usb: 3.0 type: Hitachi Full speed (or root) hub
 chip ID: 045b:0210
 Hub: 3:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
 Device-3: Perception Digital bus ID: 3:5 usb: 2.0 type: Mass Storage
 chip ID: 0aa6:1504
 Hub: 4:1 usb: 3.1 type: Full speed (or root) hub chip ID: 1d6b:0003
Sensors:
 System Temperatures: cpu: 38.5 C mobo: 29.8 C gpu: nvidia temp: 32 C
 Fan Speeds (RPM): N/A gpu: nvidia fan: 34%
Info:
 Processes: 228 Uptime: 6d 21h 01m Memory: 31.37 GiB used: 2.48 GiB (7.9%)
 Init: systemd v: 239 Compilers: gcc: 8.2.0 clang: N/A Shell: bash
 v: 4.4.23 running in: xterm inxi: 3.0.20 

 

I like that you can expand the output.

 

[longship@10:01:17 ~]$ inxi -D
Drives:
 Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
 ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
 size: 238.47 GiB
 ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
 ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
 ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
 ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB 

 

[longship@10:04:02 ~]$ inxi -Dp
Drives:
 Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
 ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
 size: 238.47 GiB
 ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
 ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
 ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
 ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB
Partition:
 ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4
 dev: /dev/nvme0n1p4
 ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat
 dev: /dev/nvme0n1p1
 ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4
 dev: /dev/nvme0n1p5
 ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4
 dev: /dev/sdc2
 ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap
 dev: /dev/nvme0n1p7 

 

[longship@10:04:22 ~]$ inxi -Dpo
Drives:
 Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
 ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
 size: 238.47 GiB
 ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
 ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
 ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
 ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB
Partition:
 ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4
 dev: /dev/nvme0n1p4
 ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat
 dev: /dev/nvme0n1p1
 ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4
 dev: /dev/nvme0n1p5
 ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4
 dev: /dev/sdc2
 ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap
 dev: /dev/nvme0n1p7
Unmounted:
 ID-1: /dev/nvme0n1p2 size: 128.0 MiB fs: <root required> label: N/A
 uuid: N/A
 ID-2: /dev/nvme0n1p3 size: 117.19 GiB fs: ntfs label: Windows7
 uuid: 5832090D3208F234
 ID-3: /dev/sda3 size: 232.66 GiB fs: ntfs label: Steam-D
 uuid: 92DA57F2DA57D159
 ID-4: /dev/sdb1 size: 223.57 GiB fs: ntfs label: Steam-E
 uuid: A8DEB8B6DEB87E5E
 ID-5: /dev/sdc1 size: 244.14 GiB fs: ntfs label: SSteam
 uuid: 6DB22EBD6D0B4E54
 ID-6: /dev/sde1 size: 582.0 MiB fs: iso9660 label: ALT p8 wmaker/x86_64
 uuid: 2018-03-12-08-47-10-00
 ID-7: /dev/sde2 size: 37.9 MiB fs: vfat label: El Torito uuid: E8CB-BCC6
 ID-8: /dev/sde3 size: 6.88 GiB fs: ext4 label: alt-live-storage
 uuid: 6c462286-5b2d-4bca-a310-81e5b3610950 

 

:breakfast:

  • Like 2

Share this post


Link to post
Share on other sites
securitybreach

Nice

Share this post


Link to post
Share on other sites
V.T. Eric Layton

securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! :)

 

What's wrong with Cerberus (main rig) and Darkstar (the VPS)??? ;)

 

Bruno named his systems after the planets, too. Or maybe it was the gods he was naming after? :)

  • Like 1

Share this post


Link to post
Share on other sites
saturnian

Oh, SUPER-NEATO!

 

vtel57@ericsbane07~:$ man inxi

 

https://smxi.org/docs/inxi-man-2.x.htm

 

Or just use inxi -h.

 

I like that you can expand the output.

 

Yeah, also with the -x, -xx, and -xxx switches. For example, inxi -Fxxx.

Share this post


Link to post
Share on other sites
wa4chq

Cool.... here's mine.

status.jpg

  • Like 1

Share this post


Link to post
Share on other sites
saturnian

How did you get it to print that beer info?

  • Like 2

Share this post


Link to post
Share on other sites
securitybreach

Cool.... here's mine.

status.jpg

 

Nice, love the beer entry :thumbsup:

 

How did you get it to print that beer info?

 

I think you can add a manual entry

  • Like 2

Share this post


Link to post
Share on other sites
wa4chq

Magic!

status2.jpg

  • Like 1

Share this post


Link to post
Share on other sites
wa4chq

Interesting... I may have to give that command a looksee. :)

 

https://slackware.pk..._slack.txz.html

Tnx for the link to the slack pkg....which also is the link to pkgs.org which has slackware pkgs....cool..... there used to be site I'd get slack pkgs from mid-2k.....they aren't around anymore...wonder if this is the new and improved?

Edited by wa4chq
  • Like 1

Share this post


Link to post
Share on other sites
wa4chq

I've seen Alien Bobs site but not the others....tnx

  • Like 2

Share this post


Link to post
Share on other sites
sunrat

I've been testing new versions of inxi (test versions are called pinxi) in Debian User Forums recently. h-2 has been a busy beaver, first rewriting it from bash to Perl, and recently replacing lsusb parsing with reading straight from /sys .

Why is everyone posting screenshots? Code tags are easier to read. Anyway here's my old system which is my daily driver. I have a much newer, more powerful production/gaming system as well.

 

$ inxi -F
System:    Host: siduction-brain2 Kernel: 4.18.3-towo.1-siduction-amd64 x86_64 bits: 64
	   Desktop: KDE Plasma 5.13.2
	   Distro: siduction 17.1.0 Patience - kde - (201703051755)
Machine:   Type: Desktop Mobo: Gigabyte model: EP45-UD3R v: x.x serial: <root required>
	   BIOS: Award v: F3 date: 09/18/2008
CPU:	   Topology: Dual Core model: Intel Core2 Duo E8500 bits: 64 type: MCP
	   L2 cache: 6144 KiB
	   Speed: 2721 MHz min/max: 2000/3166 MHz Core speeds (MHz): 1: 2721 2: 2675
Graphics:  Card-1: NVIDIA GF114 [GeForce GTX 560 Ti] driver: nouveau v: kernel
	   Display: x11 server: X.Org 1.20.1 driver: nouveau
	   unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
	   OpenGL: renderer: NVCE v: 4.3 Mesa 18.1.6
Audio:	 Card-1: Intel 82801JI HD Audio driver: snd_hda_intel
	   Card-2: NVIDIA GF114 HDMI Audio driver: snd_hda_intel
	   Sound Server: ALSA v: k4.18.3-towo.1-siduction-amd64
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
	   IF: eth0 state: down mac: 00:1f:d0:9d:ea:18
	   Card-2: TP-Link TL-WN821N v3 / TL-WN822N v2 802.11n [Atheros AR7010+AR9287]
	   type: USB driver: ath9k_htc
	   IF: wlan0 state: up mac: f8:d1:11:14:03:eb
Drives:    Local Storage: total: 1.92 TiB used: 969.52 GiB (49.2%)
	   ID-1: /dev/sda vendor: OCZ model: VERTEX2 3.5 size: 107.13 GiB
	   ID-2: /dev/sdb vendor: Western Digital model: WD1001FALS-00J7B1
	   size: 931.51 GiB
	   ID-3: /dev/sdc vendor: Western Digital model: WD1001FALS-00J7B1
	   size: 931.51 GiB
Partition: ID-1: / size: 20.47 GiB used: 14.56 GiB (71.2%) fs: ext4 dev: /dev/sda2
	   ID-2: swap-1 size: 2.29 GiB used: 396.5 MiB (16.9%) fs: swap dev: /dev/sda3
Sensors:   System Temperatures: cpu: 49.0 C mobo: N/A gpu: nouveau temp: 31 C
	   Fan Speeds (RPM): N/A gpu: nouveau fan: 1290
Info:	  Processes: 156 Uptime: 2d 21h 49m Memory: 3.85 GiB used: 3.19 GiB (82.8%)
	   Shell: bash inxi: 3.0.20

  • Like 4

Share this post


Link to post
Share on other sites
securitybreach

Nice

Share this post


Link to post
Share on other sites
wa4chq

Distro: siduction 17.1.0 Patience - kde - (201703051755)

I see you are using Siduction. I tried it a few years ago LIVE on a flash drive but don't remember much about it. Guess I'll have to try it again. How do you like it?

Edited by wa4chq

Share this post


Link to post
Share on other sites
sunrat

Distro: siduction 17.1.0 Patience - kde - (201703051755)

I see you are using Siduction. I tried it a few years ago LIVE on a flash drive but don't remember much about it. Guess I'll have to try it again. How do you like it?

I've been using it since it first appeared and used it's ancestors aptosid and sidux before it, probably for over 10 years. Note it is traditionally spelled with lower case, not capitalised.

It has faithfully given me reliable performance with recently released software, something that's not guaranteed with Debian's unstable branch. Technically you could say it's based on Debian unstable but probably more correctly it is Debian unstable with a different kernel and a few tools and tweaks. As long as you check the Update Warnings thread in their forum and cancel any full-upgrade if it proposes to remove lots of packages, it's pretty safe. Upgrades come thick and fast as it's a development version of Debian. I always do a system backup before full-upgrade, which I normally do at least once a month and preferably fortnightly, but only had to restore it once in ~10 years IIRC.

The devs are very active, and post regularly on the forum to help with issues. The main ones are German so GTranslate gets used a bit. I haven't had many issues to ask about though.

As you see above, this install is from about four releases ago, still working beautifully and rolling, rolling, rolling along! ;)

  • Like 2

Share this post


Link to post
Share on other sites
mhbell

Here are some of mine. Just did a fresh install mint 19 v2

 

m-System-Mint-19:~$ inxi -f

CPU: Quad core AMD A8-7600 Radeon R7 10 Compute Cores 4C+6G (-MCP-)

cache: 8192 KB

clock speeds: max: 3100 MHz 1: 1396 MHz 2: 1395 MHz 3: 1568 MHz

4: 1487 MHz

CPU Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1

bpext clflush cmov cmp_legacy constant_tsc cpb cpuid cr8_legacy

cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma

fma4 fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibs lahf_lm lbrv lm

lwp mca mce misalignsse mmx mmxext monitor msr mtrr nodeid_msr

nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat

pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold

pge pni popcnt pse pse36 ptsc rdtscp rep_good sep skinit ssbd sse

sse2 sse4_1 sse4_2 sse4a ssse3 svm svm_lock syscall tbm tce topoext

tsc tsc_scale vmcb_clean vme vmmcall wdt xop xsave xsaveopt

m-System-Mint-19:~$ inxi -D

Drives: HDD Total Size: 5751.1GB (1.6% used)

ID-1: USB /dev/sda model: Backup+_Hub_BK size: 5001.0GB

ID-2: /dev/sdb model: Samsung_SSD_860 size: 500.1GB

ID-3: /dev/sdc model: Samsung_SSD_850 size: 250.1GB

m-System-Mint-19:~$ inxi -m

Memory: Using dmidecode: root required for dmidecode

m-System-Mint-19:~$ sudo inxi -m

Memory: Used/Total: 2412.6/14970.2MB

Array-1 capacity: 64 GB devices: 4 EC: None

Device-1: DIMM_A1 size: 4 GB speed: 1600 MT/s type: DDR3

Device-2: DIMM_A2 size: 4 GB speed: 1600 MT/s type: DDR3

Device-3: DIMM_B1 size: 4 GB speed: 1600 MT/s type: DDR3

Device-4: DIMM_B2 size: 4 GB speed: 1600 MT/s type: DDR3

m-System-Mint-19:~$ inxi -b

System: Host: m-System-Mint-19 Kernel: 4.15.0-38-generic x86_64 bits: 64

Desktop: Cinnamon 3.8.9 Distro: Linux Mint 19 Tara

Machine: Device: desktop Mobo: ASUSTeK model: A88XM-A/USB 3.1 v: Rev X.0x serial: N/A

UEFI: American Megatrends v: 0309 date: 03/04/2016

Battery hidpp__0: charge: N/A condition: NA/NA Wh

CPU: Quad core AMD A8-7600 Radeon R7 10 Compute Cores 4C+6G (-MCP-)

speed/max: 1417/3100 MHz

Graphics: Card: Advanced Micro Devices [AMD/ATI] Kaveri [Radeon R7 Graphics]

Display Server: x11 (X.Org 1.19.6 )

drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)

Resolution: 1280x720@60.00hz

OpenGL: renderer: AMD KAVERI (DRM 2.50.0 / 4.15.0-38-generic, LLVM 6.0.0)

version: 4.5 Mesa 18.0.5

Network: Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller

driver: r8169

Drives: HDD Total Size: 5751.1GB (1.6% used)

Info: Processes: 207 Uptime: 2:10 Memory: 2410.4/14970.2MB

Client: Shell (bash) inxi: 2.3.56

 

Mel

:clap:

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...