securitybreach Posted August 19, 2018 Share Posted August 19, 2018 Here are the specs of my current machines: Desktop: Server 1: Server 2: Linode VPS: Workstation Laptop: Main carry laptop: I have a few other systems but these are the ones that currently get used. 3 Quote Link to comment Share on other sites More sharing options...
V.T. Eric Layton Posted August 19, 2018 Share Posted August 19, 2018 Interesting... I may have to give that command a looksee. https://slackware.pkgs.org/14.1/slackonly-x86_64/inxi-2.2.31-noarch-1_slack.txz.html 1 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 19, 2018 Author Share Posted August 19, 2018 Interesting... I may have to give that command a looksee. https://slackware.pk..._slack.txz.html Yeah, its been around for many years now. 1 Quote Link to comment Share on other sites More sharing options...
V.T. Eric Layton Posted August 19, 2018 Share Posted August 19, 2018 Spiffy! vtel57@ericsbane07~:$ inxi -F System: Host: ericsbane07.3108.net Kernel: 3.10.107 x86_64 (64 bit) Desktop: Xfce 4.10.2 Distro: Slackware 14.1 Machine: Mobo: Gigabyte model: GA-890FXA-UD5 v: x.x Bios: Award v: F6 date: 11/24/2010 CPU: Hexa core AMD Phenom II X6 1090T (-MCP-) cache: 3072 KB clock speeds: max: 3200 MHz 1: 3200 MHz 2: 3200 MHz 3: 3200 MHz 4: 3200 MHz 5: 3200 MHz 6: 3200 MHz Graphics: Card: NVIDIA GF114 [GeForce GTX 560] Display Server: X.Org 1.14.3 driver: nvidia Resolution: 1680x1050@59.9hz GLX Renderer: N/A GLX Version: N/A Audio: Card-1 AMD/ATI [Advanced Micro Devices ] SBx00 Azalia (Intel HDA) driver: snd_hda_intel Card-2 NVIDIA GF114 HDMI Audio Controller driver: snd_hda_intel Sound: Advanced Linux Sound Architecture v: k3.10.107 Network: Card: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller driver: r8169 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 1c:6f:65:c0:ce:24 Drives: HDD Total Size: 1640.4GB (7.8% used) ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB ID-2: /dev/sdc model: WDC_WD3200KS size: 320.1GB ID-3: /dev/sdd model: WDC_WD3200AAKS size: 320.1GB ID-4: /dev/sdb model: MAXTOR_STM350063 size: 500.1GB Partition: ID-1: / size: 48G used: 9.1G (20%) fs: ext4 dev: /dev/sda1 ID-2: /home size: 96G used: 17G (19%) fs: ext4 dev: /dev/sda2 ID-3: swap-1 size: 7.24GB used: 0.00GB (0%) fs: swap dev: /dev/sda4 ID-4: swap-2 size: 7.24GB used: 0.00GB (0%) fs: swap dev: /dev/sdb4 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 33.2C mobo: N/A gpu: 40C Fan Speeds (in rpm): cpu: N/A Info: Processes: 202 Uptime: 40 min Memory: 1249.9/11921.9MB Client: Shell (bash) inxi: 2.2.31 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 19, 2018 Author Share Posted August 19, 2018 Nice, btw there are tons of switches. For instance, inixi -D shows you harddrive specs, -N network, -G graphics, etc. 1 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 19, 2018 Author Share Posted August 19, 2018 inxi -m is nice too as it will show you the available ram, which slot it is in and how much your system can hold: 1 Quote Link to comment Share on other sites More sharing options...
V.T. Eric Layton Posted August 19, 2018 Share Posted August 19, 2018 Oh, SUPER-NEATO! vtel57@ericsbane07~:$ man inxi https://smxi.org/docs/inxi-man-2.x.htm 2 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 19, 2018 Author Share Posted August 19, 2018 Oh, SUPER-NEATO! vtel57@ericsbane07~:$ man inxi https://smxi.org/docs/inxi-man-2.x.htm Yeah, it can do many things 1 Quote Link to comment Share on other sites More sharing options...
raymac46 Posted August 19, 2018 Share Posted August 19, 2018 It works with virtual machines too. ray@ray-VirtualBox:~$ inxi -Fxz System: Host: ray-VirtualBox Kernel: 4.15.0-32-generic x86_64 bits: 64 gcc: 7.3.0 Desktop: Gnome 3.28.2 (Gtk 3.22.30-1ubuntu1) Distro: Ubuntu 18.04.1 LTS Machine: Device: oracle System: innotek product: VirtualBox v: 1.2 serial: N/A Mobo: Oracle model: VirtualBox v: 1.2 serial: N/A BIOS: innotek v: VirtualBox date: 12/01/2006 CPU: Dual core Intel Core i5-2320 (-MCP-) arch: Sandy Bridge rev.7 cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3) bmips: 11972 clock speeds: max: 2993 MHz 1: 2993 MHz 2: 2993 MHz Graphics: Card: InnoTek Systemberatung VirtualBox Graphics Adapter bus-ID: 00:02.0 Display Server: x11 (X.Org 1.19.6 ) driver: vboxvideo Resolution: 1920x975@59.96hz OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits) version: 3.3 Mesa 18.0.5 Direct Render: Yes Audio: Card Intel 82801AA AC'97 Audio Controller driver: snd_intel8x0 ports: d100 d200 bus-ID: 00:05.0 Sound: Advanced Linux Sound Architecture v: k4.15.0-32-generic Network: Card: Intel 82540EM Gigabit Ethernet Controller driver: e1000 v: 7.3.21-k8-NAPI port: d010 bus-ID: 00:03.0 IF: enp0s3 state: up speed: 1000 Mbps duplex: full mac: <filter> Drives: HDD Total Size: 21.6GB (31.9% used) ID-1: /dev/sda model: VBOX_HARDDISK size: 21.6GB Partition: ID-1: / size: 20G used: 6.5G (35%) fs: ext4 dev: /dev/sda1 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: None detected - is lm-sensors installed and configured? Info: Processes: 187 Uptime: 1 min Memory: 891.5/1993.3MB Init: systemd runlevel: 5 Gcc sys: N/A Client: Shell (bash 4.4.191) inxi: 2.3.56 ray@ray-VirtualBox:~$ 3 Quote Link to comment Share on other sites More sharing options...
saturnian Posted August 20, 2018 Share Posted August 20, 2018 It works with virtual machines too. Wow, that's interesting, and good to know! Yeah, its been around for many years now. Yep. I've been adding inxi here for a long time now, except for with a few distros that ship it by default. I'm a little too embarrassed to show the inxi -F output for my lame machines... securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 20, 2018 Author Share Posted August 20, 2018 securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! What's wrong with Cerberus (main rig) and Darkstar (the VPS)??? Quote Link to comment Share on other sites More sharing options...
saturnian Posted August 20, 2018 Share Posted August 20, 2018 Sorry, didn't notice those because the images didn't load, had to click to see those two. Wow, I'm currently running Linux on six different machines, too! I prefer to use inxi -b most of the time. This is from the machine I'm typing from right now -- I have Arch and Debian Stable living on this one (I use either Openbox, LXDE, or Xfce in the Arch installation, and either Openbox or Fluxbox in the Debian installation): $ inxi -b System: Host: steve Kernel: 4.18.1-arch1-1-ARCH x86_64 bits: 64 Desktop: Openbox 3.6.1 Distro: Arch Linux Machine: Type: Laptop System: Hewlett-Packard product: Presario CQ56 Notebook PC v: 0595110003202810010020100 serial: <root required> Mobo: Hewlett-Packard model: 1605 v: 90.16 serial: <root required> BIOS: Hewlett-Packard v: F.13 date: 11/23/2010 Battery: ID-1: BAT0 charge: 38.4 Wh condition: 38.4/38.4 Wh (100%) CPU: Single Core: Intel Celeron 900 type: MCP speed: 2191 MHz Graphics: Card-1: Intel Mobile 4 Series Integrated Graphics driver: i915 v: kernel Display: x11 server: X.Org 1.20.1 driver: intel unloaded: modesetting resolution: 1366x768~60Hz OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express v: 2.1 Mesa 18.1.6 Network: Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci Card-2: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169 Drives: Local Storage: total: 240.29 GiB used: 11.03 GiB (4.6%) Info: Processes: 114 Uptime: 6h 12m Memory: 1.88 GiB used: 889.5 MiB (46.1%) Shell: bash inxi: 3.0.20 1 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 20, 2018 Author Share Posted August 20, 2018 Nice Quote Link to comment Share on other sites More sharing options...
abarbarian Posted August 20, 2018 Share Posted August 20, 2018 [longship@09:45:37 ~]$ inxi -D -v 6 System: Host: longship Kernel: 4.17.14-arch1-1-ARCH x86_64 bits: 64 compiler: gcc v: 8.2.0 Desktop: N/A wm: WindowMaker dm: startx Distro: Arch Linux Machine: Type: Desktop System: Gigabyte product: N/A v: N/A serial: <root required> Mobo: Gigabyte model: Z170X-Gaming 7 v: x.x serial: <root required> UEFI: American Megatrends v: F6 date: 12/16/2015 Memory: RAM Report: permissions: Unable to run dmidecode. Are you root? CPU: Topology: Quad Core model: Intel Core i7-6700K bits: 64 type: MT MCP arch: Skylake-S rev: 3 L2 cache: 8192 KiB flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 64152 Speed: 4200 MHz min/max: 800/4200 MHz Core speeds (MHz): 1: 4200 2: 4201 3: 4200 4: 4200 5: 4198 6: 4200 7: 4201 8: 4199 Graphics: Card-1: NVIDIA GP104 [GeForce GTX 1070] driver: nvidia v: 396.51 bus ID: 01:00.0 chip ID: 10de:1b81 Display: server: X.Org 1.20.0 driver: nvidia resolution: 1920x1200~60Hz, 1920x1080~50Hz OpenGL: renderer: GeForce GTX 1070/PCIe/SSE2 v: 4.6.0 NVIDIA 396.51 direct render: Yes Audio: Card-1: Intel Sunrise Point-H HD Audio driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:a170 Card-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:10f0 Sound Server: ALSA v: k4.17.14-arch1-1-ARCH Network: Card-1: Intel Ethernet I219-V driver: e1000e v: 3.2.6-k port: N/A bus ID: 00:1f.6 chip ID: 8086:15b8 IF: enp0s31f6 state: up speed: 100 Mbps duplex: full mac: 40:8d:5c:e0:e4:aa Card-2: Qualcomm Atheros Killer E2400 Gigabit Ethernet driver: alx v: kernel port: c000 bus ID: 05:00 chip ID: 1969:e0a1 IF: enp5s0 state: down mac: 40:8d:5c:e0:e4:ac Drives: Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%) ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000 size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 serial: S1XWNYAG908281 ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB speed: 6.0 Gb/s serial: 15230FBC4849 temp: 34 C ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB speed: 6.0 Gb/s serial: MK140221AS1269223 temp: 31 C ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB speed: 6.0 Gb/s serial: S3Z2NB0K369918E ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB serial: SN0050600227 Message: No Optical or Floppy data was found. Partition: ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4 dev: /dev/nvme0n1p4 label: ArchRoot uuid: facb8acb-8d5d-4d91-8630-31a781a95d44 ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat dev: /dev/nvme0n1p1 label: SYSTEM uuid: 681C-17E0 ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4 dev: /dev/nvme0n1p5 label: Anarchy uuid: 2276168e-072b-4266-9ccf-3f9f425b630c ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4 dev: /dev/sdc2 label: ASteam uuid: 74fde71c-30ba-4f96-8b92-5ad5d592cf59 ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p7 label: swap uuid: de1de544-0ddc-4be8-9712-133d46becf49 Unmounted: ID-1: /dev/nvme0n1p2 size: 128.0 MiB fs: <root required> label: N/A uuid: N/A ID-2: /dev/nvme0n1p3 size: 117.19 GiB fs: ntfs label: Windows7 uuid: 5832090D3208F234 ID-3: /dev/sda3 size: 232.66 GiB fs: ntfs label: Steam-D uuid: 92DA57F2DA57D159 ID-4: /dev/sdb1 size: 223.57 GiB fs: ntfs label: Steam-E uuid: A8DEB8B6DEB87E5E ID-5: /dev/sdc1 size: 244.14 GiB fs: ntfs label: SSteam uuid: 6DB22EBD6D0B4E54 ID-6: /dev/sde1 size: 582.0 MiB fs: iso9660 label: ALT p8 wmaker/x86_64 uuid: 2018-03-12-08-47-10-00 ID-7: /dev/sde2 size: 37.9 MiB fs: vfat label: El Torito uuid: E8CB-BCC6 ID-8: /dev/sde3 size: 6.88 GiB fs: ext4 label: alt-live-storage uuid: 6c462286-5b2d-4bca-a310-81e5b3610950 USB: Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002 Hub: 1:2 usb: 2.1 type: Hitachi Full speed (or root) hub chip ID: 045b:0209 Device-1: Cooler Master bus ID: 1:3 usb: 2.0 type: Mouse chip ID: 2516:001e Device-2: Keyboard bus ID: 1:5 usb: 2.0 type: Keyboard chip ID: 28de:1142 Hub: 2:1 usb: 3.0 type: Full speed (or root) hub chip ID: 1d6b:0003 Hub: 2:2 usb: 3.0 type: Hitachi Full speed (or root) hub chip ID: 045b:0210 Hub: 3:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002 Device-3: Perception Digital bus ID: 3:5 usb: 2.0 type: Mass Storage chip ID: 0aa6:1504 Hub: 4:1 usb: 3.1 type: Full speed (or root) hub chip ID: 1d6b:0003 Sensors: System Temperatures: cpu: 38.5 C mobo: 29.8 C gpu: nvidia temp: 32 C Fan Speeds (RPM): N/A gpu: nvidia fan: 34% Info: Processes: 228 Uptime: 6d 21h 01m Memory: 31.37 GiB used: 2.48 GiB (7.9%) Init: systemd v: 239 Compilers: gcc: 8.2.0 clang: N/A Shell: bash v: 4.4.23 running in: xterm inxi: 3.0.20 I like that you can expand the output. [longship@10:01:17 ~]$ inxi -D Drives: Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%) ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000 size: 238.47 GiB ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB [longship@10:04:02 ~]$ inxi -Dp Drives: Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%) ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000 size: 238.47 GiB ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB Partition: ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4 dev: /dev/nvme0n1p4 ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat dev: /dev/nvme0n1p1 ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4 dev: /dev/nvme0n1p5 ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4 dev: /dev/sdc2 ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p7 [longship@10:04:22 ~]$ inxi -Dpo Drives: Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%) ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000 size: 238.47 GiB ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB Partition: ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4 dev: /dev/nvme0n1p4 ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat dev: /dev/nvme0n1p1 ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4 dev: /dev/nvme0n1p5 ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4 dev: /dev/sdc2 ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p7 Unmounted: ID-1: /dev/nvme0n1p2 size: 128.0 MiB fs: <root required> label: N/A uuid: N/A ID-2: /dev/nvme0n1p3 size: 117.19 GiB fs: ntfs label: Windows7 uuid: 5832090D3208F234 ID-3: /dev/sda3 size: 232.66 GiB fs: ntfs label: Steam-D uuid: 92DA57F2DA57D159 ID-4: /dev/sdb1 size: 223.57 GiB fs: ntfs label: Steam-E uuid: A8DEB8B6DEB87E5E ID-5: /dev/sdc1 size: 244.14 GiB fs: ntfs label: SSteam uuid: 6DB22EBD6D0B4E54 ID-6: /dev/sde1 size: 582.0 MiB fs: iso9660 label: ALT p8 wmaker/x86_64 uuid: 2018-03-12-08-47-10-00 ID-7: /dev/sde2 size: 37.9 MiB fs: vfat label: El Torito uuid: E8CB-BCC6 ID-8: /dev/sde3 size: 6.88 GiB fs: ext4 label: alt-live-storage uuid: 6c462286-5b2d-4bca-a310-81e5b3610950 2 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 20, 2018 Author Share Posted August 20, 2018 Nice Quote Link to comment Share on other sites More sharing options...
V.T. Eric Layton Posted August 20, 2018 Share Posted August 20, 2018 securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! What's wrong with Cerberus (main rig) and Darkstar (the VPS)??? Bruno named his systems after the planets, too. Or maybe it was the gods he was naming after? 1 Quote Link to comment Share on other sites More sharing options...
saturnian Posted August 21, 2018 Share Posted August 21, 2018 Oh, SUPER-NEATO! vtel57@ericsbane07~:$ man inxi https://smxi.org/docs/inxi-man-2.x.htm Or just use inxi -h. I like that you can expand the output. Yeah, also with the -x, -xx, and -xxx switches. For example, inxi -Fxxx. Quote Link to comment Share on other sites More sharing options...
wa4chq Posted August 21, 2018 Share Posted August 21, 2018 Cool.... here's mine. 1 Quote Link to comment Share on other sites More sharing options...
saturnian Posted August 21, 2018 Share Posted August 21, 2018 How did you get it to print that beer info? 2 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 21, 2018 Author Share Posted August 21, 2018 Cool.... here's mine. Nice, love the beer entry How did you get it to print that beer info? I think you can add a manual entry 2 Quote Link to comment Share on other sites More sharing options...
wa4chq Posted August 21, 2018 Share Posted August 21, 2018 Magic! 1 Quote Link to comment Share on other sites More sharing options...
wa4chq Posted August 22, 2018 Share Posted August 22, 2018 (edited) Interesting... I may have to give that command a looksee. https://slackware.pk..._slack.txz.html Tnx for the link to the slack pkg....which also is the link to pkgs.org which has slackware pkgs....cool..... there used to be site I'd get slack pkgs from mid-2k.....they aren't around anymore...wonder if this is the new and improved? Edited August 22, 2018 by wa4chq 1 Quote Link to comment Share on other sites More sharing options...
V.T. Eric Layton Posted August 22, 2018 Share Posted August 22, 2018 Check out Alien Bob's (Eric Hameleers) repo, too. He has tons of stuff in there... http://www.slackware.com/~alien/slackbuilds/ Also, Robbie Workman's collection... http://rlworkman.net/pkgs/ And... http://slackware.uk/ Pfffffft! Build from source. HA! Have FUN! 2 Quote Link to comment Share on other sites More sharing options...
wa4chq Posted August 22, 2018 Share Posted August 22, 2018 I've seen Alien Bobs site but not the others....tnx 2 Quote Link to comment Share on other sites More sharing options...
sunrat Posted August 23, 2018 Share Posted August 23, 2018 I've been testing new versions of inxi (test versions are called pinxi) in Debian User Forums recently. h-2 has been a busy beaver, first rewriting it from bash to Perl, and recently replacing lsusb parsing with reading straight from /sys . Why is everyone posting screenshots? Code tags are easier to read. Anyway here's my old system which is my daily driver. I have a much newer, more powerful production/gaming system as well. $ inxi -F System: Host: siduction-brain2 Kernel: 4.18.3-towo.1-siduction-amd64 x86_64 bits: 64 Desktop: KDE Plasma 5.13.2 Distro: siduction 17.1.0 Patience - kde - (201703051755) Machine: Type: Desktop Mobo: Gigabyte model: EP45-UD3R v: x.x serial: <root required> BIOS: Award v: F3 date: 09/18/2008 CPU: Topology: Dual Core model: Intel Core2 Duo E8500 bits: 64 type: MCP L2 cache: 6144 KiB Speed: 2721 MHz min/max: 2000/3166 MHz Core speeds (MHz): 1: 2721 2: 2675 Graphics: Card-1: NVIDIA GF114 [GeForce GTX 560 Ti] driver: nouveau v: kernel Display: x11 server: X.Org 1.20.1 driver: nouveau unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz OpenGL: renderer: NVCE v: 4.3 Mesa 18.1.6 Audio: Card-1: Intel 82801JI HD Audio driver: snd_hda_intel Card-2: NVIDIA GF114 HDMI Audio driver: snd_hda_intel Sound Server: ALSA v: k4.18.3-towo.1-siduction-amd64 Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 IF: eth0 state: down mac: 00:1f:d0:9d:ea:18 Card-2: TP-Link TL-WN821N v3 / TL-WN822N v2 802.11n [Atheros AR7010+AR9287] type: USB driver: ath9k_htc IF: wlan0 state: up mac: f8:d1:11:14:03:eb Drives: Local Storage: total: 1.92 TiB used: 969.52 GiB (49.2%) ID-1: /dev/sda vendor: OCZ model: VERTEX2 3.5 size: 107.13 GiB ID-2: /dev/sdb vendor: Western Digital model: WD1001FALS-00J7B1 size: 931.51 GiB ID-3: /dev/sdc vendor: Western Digital model: WD1001FALS-00J7B1 size: 931.51 GiB Partition: ID-1: / size: 20.47 GiB used: 14.56 GiB (71.2%) fs: ext4 dev: /dev/sda2 ID-2: swap-1 size: 2.29 GiB used: 396.5 MiB (16.9%) fs: swap dev: /dev/sda3 Sensors: System Temperatures: cpu: 49.0 C mobo: N/A gpu: nouveau temp: 31 C Fan Speeds (RPM): N/A gpu: nouveau fan: 1290 Info: Processes: 156 Uptime: 2d 21h 49m Memory: 3.85 GiB used: 3.19 GiB (82.8%) Shell: bash inxi: 3.0.20 4 Quote Link to comment Share on other sites More sharing options...
securitybreach Posted August 23, 2018 Author Share Posted August 23, 2018 Nice Quote Link to comment Share on other sites More sharing options...
wa4chq Posted August 23, 2018 Share Posted August 23, 2018 (edited) Distro: siduction 17.1.0 Patience - kde - (201703051755) I see you are using Siduction. I tried it a few years ago LIVE on a flash drive but don't remember much about it. Guess I'll have to try it again. How do you like it? Edited August 23, 2018 by wa4chq Quote Link to comment Share on other sites More sharing options...
sunrat Posted August 23, 2018 Share Posted August 23, 2018 Distro: siduction 17.1.0 Patience - kde - (201703051755) I see you are using Siduction. I tried it a few years ago LIVE on a flash drive but don't remember much about it. Guess I'll have to try it again. How do you like it? I've been using it since it first appeared and used it's ancestors aptosid and sidux before it, probably for over 10 years. Note it is traditionally spelled with lower case, not capitalised. It has faithfully given me reliable performance with recently released software, something that's not guaranteed with Debian's unstable branch. Technically you could say it's based on Debian unstable but probably more correctly it is Debian unstable with a different kernel and a few tools and tweaks. As long as you check the Update Warnings thread in their forum and cancel any full-upgrade if it proposes to remove lots of packages, it's pretty safe. Upgrades come thick and fast as it's a development version of Debian. I always do a system backup before full-upgrade, which I normally do at least once a month and preferably fortnightly, but only had to restore it once in ~10 years IIRC. The devs are very active, and post regularly on the forum to help with issues. The main ones are German so GTranslate gets used a bit. I haven't had many issues to ask about though. As you see above, this install is from about four releases ago, still working beautifully and rolling, rolling, rolling along! 2 Quote Link to comment Share on other sites More sharing options...
mhbell Posted November 4, 2018 Share Posted November 4, 2018 Here are some of mine. Just did a fresh install mint 19 v2 m-System-Mint-19:~$ inxi -f CPU: Quad core AMD A8-7600 Radeon R7 10 Compute Cores 4C+6G (-MCP-) cache: 8192 KB clock speeds: max: 3100 MHz 1: 1396 MHz 2: 1395 MHz 3: 1568 MHz 4: 1487 MHz CPU Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 bpext clflush cmov cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid fma fma4 fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibs lahf_lm lbrv lm lwp mca mce misalignsse mmx mmxext monitor msr mtrr nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni popcnt pse pse36 ptsc rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 svm svm_lock syscall tbm tce topoext tsc tsc_scale vmcb_clean vme vmmcall wdt xop xsave xsaveopt m-System-Mint-19:~$ inxi -D Drives: HDD Total Size: 5751.1GB (1.6% used) ID-1: USB /dev/sda model: Backup+_Hub_BK size: 5001.0GB ID-2: /dev/sdb model: Samsung_SSD_860 size: 500.1GB ID-3: /dev/sdc model: Samsung_SSD_850 size: 250.1GB m-System-Mint-19:~$ inxi -m Memory: Using dmidecode: root required for dmidecode m-System-Mint-19:~$ sudo inxi -m Memory: Used/Total: 2412.6/14970.2MB Array-1 capacity: 64 GB devices: 4 EC: None Device-1: DIMM_A1 size: 4 GB speed: 1600 MT/s type: DDR3 Device-2: DIMM_A2 size: 4 GB speed: 1600 MT/s type: DDR3 Device-3: DIMM_B1 size: 4 GB speed: 1600 MT/s type: DDR3 Device-4: DIMM_B2 size: 4 GB speed: 1600 MT/s type: DDR3 m-System-Mint-19:~$ inxi -b System: Host: m-System-Mint-19 Kernel: 4.15.0-38-generic x86_64 bits: 64 Desktop: Cinnamon 3.8.9 Distro: Linux Mint 19 Tara Machine: Device: desktop Mobo: ASUSTeK model: A88XM-A/USB 3.1 v: Rev X.0x serial: N/A UEFI: American Megatrends v: 0309 date: 03/04/2016 Battery hidpp__0: charge: N/A condition: NA/NA Wh CPU: Quad core AMD A8-7600 Radeon R7 10 Compute Cores 4C+6G (-MCP-) speed/max: 1417/3100 MHz Graphics: Card: Advanced Micro Devices [AMD/ATI] Kaveri [Radeon R7 Graphics] Display Server: x11 (X.Org 1.19.6 ) drivers: ati,radeon (unloaded: modesetting,fbdev,vesa) Resolution: 1280x720@60.00hz OpenGL: renderer: AMD KAVERI (DRM 2.50.0 / 4.15.0-38-generic, LLVM 6.0.0) version: 4.5 Mesa 18.0.5 Network: Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller driver: r8169 Drives: HDD Total Size: 5751.1GB (1.6% used) Info: Processes: 207 Uptime: 2:10 Memory: 2410.4/14970.2MB Client: Shell (bash) inxi: 2.3.56 Mel 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.