Jump to content


My systems' configs


  • Please log in to reply
27 replies to this topic

#1 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 19 August 2018 - 10:42 AM

Here are the specs of my current machines:


Desktop:  Posted Image Server 1:  Posted Image Server 2:  Posted Image

Linode VPS: Posted Image Workstation Laptop: Posted Image Main carry laptop: Posted Image

I have a few other systems but these are the ones that currently get used.
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#2 OFFLINE   V.T. Eric Layton

V.T. Eric Layton

    Nocturnal Slacker

  • Forum Admins
  • 21,508 posts

Posted 19 August 2018 - 02:16 PM

Interesting... I may have to give that command a looksee. :)

https://slackware.pk..._slack.txz.html

#3 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 19 August 2018 - 02:19 PM

View PostV.T. Eric Layton, on 19 August 2018 - 02:16 PM, said:

Interesting... I may have to give that command a looksee. :)

https://slackware.pk..._slack.txz.html

Yeah, its been around for many years now.
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#4 OFFLINE   V.T. Eric Layton

V.T. Eric Layton

    Nocturnal Slacker

  • Forum Admins
  • 21,508 posts

Posted 19 August 2018 - 02:23 PM

Spiffy!

vtel57@ericsbane07~:$ inxi -F
System:	Host: ericsbane07.3108.net Kernel: 3.10.107 x86_64 (64 bit)
		   Desktop: Xfce 4.10.2 Distro: Slackware 14.1
Machine:   Mobo: Gigabyte model: GA-890FXA-UD5 v: x.x
		   Bios: Award v: F6 date: 11/24/2010
CPU:	   Hexa core AMD Phenom II X6 1090T (-MCP-) cache: 3072 KB
		   clock speeds: max: 3200 MHz 1: 3200 MHz 2: 3200 MHz 3: 3200 MHz
		   4: 3200 MHz 5: 3200 MHz 6: 3200 MHz
Graphics:  Card: NVIDIA GF114 [GeForce GTX 560]
		   Display Server: X.Org 1.14.3 driver: nvidia
		   Resolution: 1680x1050@59.9hz
		   GLX Renderer: N/A GLX Version: N/A
Audio:	 Card-1 AMD/ATI [Advanced Micro Devices ] SBx00 Azalia (Intel HDA)
		   driver: snd_hda_intel
		   Card-2 NVIDIA GF114 HDMI Audio Controller driver: snd_hda_intel
		   Sound: Advanced Linux Sound Architecture v: k3.10.107
Network:   Card: Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller
		   driver: r8169
		   IF: eth0 state: up speed: 1000 Mbps duplex: full
		   mac: 1c:6f:65:c0:ce:24
Drives:	HDD Total Size: 1640.4GB (7.8% used)
		   ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
		   ID-2: /dev/sdc model: WDC_WD3200KS size: 320.1GB
		   ID-3: /dev/sdd model: WDC_WD3200AAKS size: 320.1GB
		   ID-4: /dev/sdb model: MAXTOR_STM350063 size: 500.1GB
Partition: ID-1: / size: 48G used: 9.1G (20%) fs: ext4 dev: /dev/sda1
		   ID-2: /home size: 96G used: 17G (19%) fs: ext4 dev: /dev/sda2
		   ID-3: swap-1 size: 7.24GB used: 0.00GB (0%) fs: swap dev: /dev/sda4
		   ID-4: swap-2 size: 7.24GB used: 0.00GB (0%) fs: swap dev: /dev/sdb4
RAID:	  No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 33.2C mobo: N/A gpu: 40C
		   Fan Speeds (in rpm): cpu: N/A
Info:	  Processes: 202 Uptime: 40 min Memory: 1249.9/11921.9MB
		   Client: Shell (bash) inxi: 2.2.31


#5 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 19 August 2018 - 02:29 PM

Nice, btw there are tons of switches. For instance, inixi -D shows you harddrive specs, -N network, -G graphics, etc.

Posted Image
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#6 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 19 August 2018 - 02:33 PM

inxi -m is nice too as it will show you the available ram, which slot it is in and how much your system can hold:

Posted Image
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#7 OFFLINE   V.T. Eric Layton

V.T. Eric Layton

    Nocturnal Slacker

  • Forum Admins
  • 21,508 posts

Posted 19 August 2018 - 02:38 PM

Oh, SUPER-NEATO!

vtel57@ericsbane07~:$ man inxi

https://smxi.org/docs/inxi-man-2.x.htm

#8 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 19 August 2018 - 02:48 PM

View PostV.T. Eric Layton, on 19 August 2018 - 02:38 PM, said:

Oh, SUPER-NEATO!

vtel57@ericsbane07~:$ man inxi

https://smxi.org/docs/inxi-man-2.x.htm

Yeah, it can do many things :thumbsup:
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#9 OFFLINE   raymac46

raymac46

    Discussion Deity

  • Forum MVP
  • 3,815 posts

Posted 19 August 2018 - 03:49 PM

It works with virtual machines too.

ray@ray-VirtualBox:~$ inxi -Fxz
System:	Host: ray-VirtualBox Kernel: 4.15.0-32-generic x86_64
		   bits: 64 gcc: 7.3.0
		   Desktop: Gnome 3.28.2 (Gtk 3.22.30-1ubuntu1)
		   Distro: Ubuntu 18.04.1 LTS
Machine:   Device: oracle System: innotek product: VirtualBox v: 1.2 serial: N/A
		   Mobo: Oracle model: VirtualBox v: 1.2 serial: N/A
		   BIOS: innotek v: VirtualBox date: 12/01/2006
CPU:	   Dual core Intel Core i5-2320 (-MCP-)
		   arch: Sandy Bridge rev.7 cache: 6144 KB
		   flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3) bmips: 11972
		   clock speeds: max: 2993 MHz 1: 2993 MHz 2: 2993 MHz
Graphics:  Card: InnoTek Systemberatung VirtualBox Graphics Adapter
		   bus-ID: 00:02.0
		   Display Server: x11 (X.Org 1.19.6 ) driver: vboxvideo
		   Resolution: 1920x975@59.96hz
		   OpenGL: renderer: llvmpipe (LLVM 6.0, 256 bits)
		   version: 3.3 Mesa 18.0.5 Direct Render: Yes
Audio:	 Card Intel 82801AA AC'97 Audio Controller
		   driver: snd_intel8x0 ports: d100 d200 bus-ID: 00:05.0
		   Sound: Advanced Linux Sound Architecture v: k4.15.0-32-generic
Network:   Card: Intel 82540EM Gigabit Ethernet Controller
		   driver: e1000 v: 7.3.21-k8-NAPI port: d010 bus-ID: 00:03.0
		   IF: enp0s3 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:	HDD Total Size: 21.6GB (31.9% used)
		   ID-1: /dev/sda model: VBOX_HARDDISK size: 21.6GB
Partition: ID-1: / size: 20G used: 6.5G (35%) fs: ext4 dev: /dev/sda1
RAID:	  No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:	  Processes: 187 Uptime: 1 min Memory: 891.5/1993.3MB
		   Init: systemd runlevel: 5 Gcc sys: N/A
		   Client: Shell (bash 4.4.191) inxi: 2.3.56
ray@ray-VirtualBox:~$

Posted Image

Registered Linux User 445659

#10 OFFLINE   saturnian

saturnian

    Multithreader

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,159 posts

Posted 19 August 2018 - 10:32 PM

View Postraymac46, on 19 August 2018 - 03:49 PM, said:

It works with virtual machines too.

Wow, that's interesting, and good to know!

View Postsecuritybreach, on 19 August 2018 - 02:19 PM, said:

Yeah, its been around for many years now.

Yep. I've been adding inxi here for a long time now, except for with a few distros that ship it by default.

I'm a little too embarrassed to show the inxi -F output for my lame machines...

securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! :)

#11 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 19 August 2018 - 10:37 PM

View Postsaturnian, on 19 August 2018 - 10:32 PM, said:

securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! :)

What's wrong with Cerberus (main rig) and Darkstar (the VPS)??? ;)
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#12 OFFLINE   saturnian

saturnian

    Multithreader

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,159 posts

Posted 19 August 2018 - 11:27 PM

Sorry, didn't notice those because the images didn't load, had to click to see those two.

Wow, I'm currently running Linux on six different machines, too!

I prefer to use inxi -b most of the time. This is from the machine I'm typing from right now -- I have Arch and Debian Stable living on this one (I use either Openbox, LXDE, or Xfce in the Arch installation, and either Openbox or Fluxbox in the Debian installation):

$ inxi -b
System:	Host: steve Kernel: 4.18.1-arch1-1-ARCH x86_64 bits: 64 Desktop: Openbox 3.6.1
		 Distro: Arch Linux
Machine: Type: Laptop System: Hewlett-Packard product: Presario CQ56 Notebook PC
		 v: 0595110003202810010020100 serial: <root required>
		 Mobo: Hewlett-Packard model: 1605 v: 90.16 serial: <root required>
		 BIOS: Hewlett-Packard v: F.13 date: 11/23/2010
Battery: ID-1: BAT0 charge: 38.4 Wh condition: 38.4/38.4 Wh (100%)
CPU:	 Single Core: Intel Celeron 900 type: MCP speed: 2191 MHz
Graphics: Card-1: Intel Mobile 4 Series Integrated Graphics driver: i915 v: kernel
		 Display: x11 server: X.Org 1.20.1 driver: intel unloaded: modesetting
		 resolution: 1366x768~60Hz
		 OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express v: 2.1 Mesa 18.1.6
Network: Card-1: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
		 Card-2: Realtek RTL810xE PCI Express Fast Ethernet driver: r8169
Drives:	Local Storage: total: 240.29 GiB used: 11.03 GiB (4.6%)
Info:	 Processes: 114 Uptime: 6h 12m Memory: 1.88 GiB used: 889.5 MiB (46.1%) Shell: bash
		 inxi: 3.0.20


#13 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 20 August 2018 - 04:34 AM

Nice :thumbsup:
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#14 OFFLINE   abarbarian

abarbarian

    Thread Kahuna

  • Forum MVP
  • 5,627 posts

Posted 20 August 2018 - 05:13 AM

[longship@09:45:37 ~]$ inxi -D -v 6
System:
  Host: longship Kernel: 4.17.14-arch1-1-ARCH x86_64 bits: 64 compiler: gcc
  v: 8.2.0 Desktop: N/A wm: WindowMaker dm: startx Distro: Arch Linux
Machine:
  Type: Desktop System: Gigabyte product: N/A v: N/A serial: <root required>
  Mobo: Gigabyte model: Z170X-Gaming 7 v: x.x serial: <root required>
  UEFI: American Megatrends v: F6 date: 12/16/2015
Memory:
  RAM Report: permissions: Unable to run dmidecode. Are you root?
CPU:
  Topology: Quad Core model: Intel Core i7-6700K bits: 64 type: MT MCP
  arch: Skylake-S rev: 3 L2 cache: 8192 KiB
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 64152
  Speed: 4200 MHz min/max: 800/4200 MHz Core speeds (MHz): 1: 4200 2: 4201
  3: 4200 4: 4200 5: 4198 6: 4200 7: 4201 8: 4199
Graphics:
  Card-1: NVIDIA GP104 [GeForce GTX 1070] driver: nvidia v: 396.51
  bus ID: 01:00.0 chip ID: 10de:1b81
  Display: server: X.Org 1.20.0 driver: nvidia
  resolution: 1920x1200~60Hz, 1920x1080~50Hz
  OpenGL: renderer: GeForce GTX 1070/PCIe/SSE2 v: 4.6.0 NVIDIA 396.51
  direct render: Yes
Audio:
  Card-1: Intel Sunrise Point-H HD Audio driver: snd_hda_intel v: kernel
  bus ID: 00:1f.3 chip ID: 8086:a170
  Card-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel v: kernel
  bus ID: 01:00.1 chip ID: 10de:10f0
  Sound Server: ALSA v: k4.17.14-arch1-1-ARCH
Network:
  Card-1: Intel Ethernet I219-V driver: e1000e v: 3.2.6-k port: N/A
  bus ID: 00:1f.6 chip ID: 8086:15b8
  IF: enp0s31f6 state: up speed: 100 Mbps duplex: full
  mac: 40:8d:5c:e0:e4:aa
  Card-2: Qualcomm Atheros Killer E2400 Gigabit Ethernet driver: alx
  v: kernel port: c000 bus ID: 05:00 chip ID: 1969:e0a1
  IF: enp5s0 state: down mac: 40:8d:5c:e0:e4:ac
Drives:
  Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
  size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 serial: S1XWNYAG908281
  ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
  speed: 6.0 Gb/s serial: 15230FBC4849 temp: 34 C
  ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
  speed: 6.0 Gb/s serial: MK140221AS1269223 temp: 31 C
  ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
  speed: 6.0 Gb/s serial: S3Z2NB0K369918E
  ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB
  serial: SN0050600227
  Message: No Optical or Floppy data was found.
Partition:
  ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4
  dev: /dev/nvme0n1p4 label: ArchRoot
  uuid: facb8acb-8d5d-4d91-8630-31a781a95d44
  ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat
  dev: /dev/nvme0n1p1 label: SYSTEM uuid: 681C-17E0
  ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4
  dev: /dev/nvme0n1p5 label: Anarchy
  uuid: 2276168e-072b-4266-9ccf-3f9f425b630c
  ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4
  dev: /dev/sdc2 label: ASteam uuid: 74fde71c-30ba-4f96-8b92-5ad5d592cf59
  ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap
  dev: /dev/nvme0n1p7 label: swap uuid: de1de544-0ddc-4be8-9712-133d46becf49
Unmounted:
  ID-1: /dev/nvme0n1p2 size: 128.0 MiB fs: <root required> label: N/A
  uuid: N/A
  ID-2: /dev/nvme0n1p3 size: 117.19 GiB fs: ntfs label: Windows7
  uuid: 5832090D3208F234
  ID-3: /dev/sda3 size: 232.66 GiB fs: ntfs label: Steam-D
  uuid: 92DA57F2DA57D159
  ID-4: /dev/sdb1 size: 223.57 GiB fs: ntfs label: Steam-E
  uuid: A8DEB8B6DEB87E5E
  ID-5: /dev/sdc1 size: 244.14 GiB fs: ntfs label: SSteam
  uuid: 6DB22EBD6D0B4E54
  ID-6: /dev/sde1 size: 582.0 MiB fs: iso9660 label: ALT p8 wmaker/x86_64
  uuid: 2018-03-12-08-47-10-00
  ID-7: /dev/sde2 size: 37.9 MiB fs: vfat label: El Torito uuid: E8CB-BCC6
  ID-8: /dev/sde3 size: 6.88 GiB fs: ext4 label: alt-live-storage
  uuid: 6c462286-5b2d-4bca-a310-81e5b3610950
USB:
  Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
  Hub: 1:2 usb: 2.1 type: Hitachi Full speed (or root) hub
  chip ID: 045b:0209
  Device-1: Cooler Master bus ID: 1:3 usb: 2.0 type: Mouse
  chip ID: 2516:001e
  Device-2: Keyboard bus ID: 1:5 usb: 2.0 type: Keyboard chip ID: 28de:1142 
 Hub: 2:1 usb: 3.0 type: Full speed (or root) hub chip ID: 1d6b:0003
  Hub: 2:2 usb: 3.0 type: Hitachi Full speed (or root) hub
  chip ID: 045b:0210
  Hub: 3:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
  Device-3: Perception Digital bus ID: 3:5 usb: 2.0 type: Mass Storage
  chip ID: 0aa6:1504
  Hub: 4:1 usb: 3.1 type: Full speed (or root) hub chip ID: 1d6b:0003
Sensors:
  System Temperatures: cpu: 38.5 C mobo: 29.8 C gpu: nvidia temp: 32 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 34%
Info:
  Processes: 228 Uptime: 6d 21h 01m Memory: 31.37 GiB used: 2.48 GiB (7.9%)
  Init: systemd v: 239 Compilers: gcc: 8.2.0 clang: N/A Shell: bash
  v: 4.4.23 running in: xterm inxi: 3.0.20 

I like that  you can expand the output.

[longship@10:01:17 ~]$ inxi -D
Drives:
  Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
  size: 238.47 GiB
  ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
  ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
  ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
  ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB 

[longship@10:04:02 ~]$ inxi -Dp
Drives:
  Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
  size: 238.47 GiB
  ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
  ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
  ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
  ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB
Partition:
  ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4
  dev: /dev/nvme0n1p4
  ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat
  dev: /dev/nvme0n1p1
  ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4
  dev: /dev/nvme0n1p5
  ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4
  dev: /dev/sdc2
  ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap
  dev: /dev/nvme0n1p7 

[longship@10:04:22 ~]$ inxi -Dpo
Drives:
  Local Storage: total: 1.14 TiB used: 147.72 GiB (12.6%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVPV256HDGL-00000
  size: 238.47 GiB
  ID-2: /dev/sda vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
  ID-3: /dev/sdb vendor: Mushkin model: MKNSSDCR240GB-DX7 size: 223.57 GiB
  ID-4: /dev/sdc vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
  ID-5: /dev/sde type: USB vendor: Seagate model: ST68022C F size: 7.45 GiB
Partition:
  ID-1: / size: 28.71 GiB used: 18.36 GiB (63.9%) fs: ext4
  dev: /dev/nvme0n1p4
  ID-2: /boot size: 96.0 MiB used: 67.1 MiB (69.9%) fs: vfat
  dev: /dev/nvme0n1p1
  ID-3: /home size: 88.74 GiB used: 63.15 GiB (71.2%) fs: ext4
  dev: /dev/nvme0n1p5
  ID-4: /mnt/ASteam size: 217.14 GiB used: 66.15 GiB (30.5%) fs: ext4
  dev: /dev/sdc2
  ID-5: swap-1 size: 1.48 GiB used: 0 KiB (0.0%) fs: swap
  dev: /dev/nvme0n1p7
Unmounted:
  ID-1: /dev/nvme0n1p2 size: 128.0 MiB fs: <root required> label: N/A
  uuid: N/A
  ID-2: /dev/nvme0n1p3 size: 117.19 GiB fs: ntfs label: Windows7
  uuid: 5832090D3208F234
  ID-3: /dev/sda3 size: 232.66 GiB fs: ntfs label: Steam-D
  uuid: 92DA57F2DA57D159
  ID-4: /dev/sdb1 size: 223.57 GiB fs: ntfs label: Steam-E
  uuid: A8DEB8B6DEB87E5E
  ID-5: /dev/sdc1 size: 244.14 GiB fs: ntfs label: SSteam
  uuid: 6DB22EBD6D0B4E54
  ID-6: /dev/sde1 size: 582.0 MiB fs: iso9660 label: ALT p8 wmaker/x86_64
  uuid: 2018-03-12-08-47-10-00
  ID-7: /dev/sde2 size: 37.9 MiB fs: vfat label: El Torito uuid: E8CB-BCC6
  ID-8: /dev/sde3 size: 6.88 GiB fs: ext4 label: alt-live-storage
  uuid: 6c462286-5b2d-4bca-a310-81e5b3610950 

:breakfast:
Install ARCH
You'll never need to install it again
"I did and I'm really happy"

Posted Image~~~~~~~~~~~~~Posted Image

#15 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 20 August 2018 - 10:17 AM

Nice
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#16 OFFLINE   V.T. Eric Layton

V.T. Eric Layton

    Nocturnal Slacker

  • Forum Admins
  • 21,508 posts

Posted 20 August 2018 - 12:16 PM

View Postsecuritybreach, on 19 August 2018 - 10:37 PM, said:

View Postsaturnian, on 19 August 2018 - 10:32 PM, said:

securitybreach! @Megatron, @saturn, @Jupiter, @Venus! Hey, man, I like that! :)

What's wrong with Cerberus (main rig) and Darkstar (the VPS)??? ;)

Bruno named his systems after the planets, too. Or maybe it was the gods he was naming after? :)

#17 OFFLINE   saturnian

saturnian

    Multithreader

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,159 posts

Posted 20 August 2018 - 10:33 PM

View PostV.T. Eric Layton, on 19 August 2018 - 02:38 PM, said:

Oh, SUPER-NEATO!

vtel57@ericsbane07~:$ man inxi

https://smxi.org/docs/inxi-man-2.x.htm

Or just use inxi -h.

View Postabarbarian, on 20 August 2018 - 05:13 AM, said:

I like that  you can expand the output.

Yeah, also with the -x, -xx, and -xxx switches. For example, inxi -Fxxx.

#18 OFFLINE   wa4chq

wa4chq

    Thread Head

  • Members
  • PipPipPipPipPipPip
  • 516 posts

Posted 21 August 2018 - 07:24 AM

Cool.... here's mine.
Posted Image

Posted Image
REGISTERED LINUX USER #547579


#19 OFFLINE   saturnian

saturnian

    Multithreader

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,159 posts

Posted 21 August 2018 - 09:19 AM

How did you get it to print that beer info?

#20 OFFLINE   securitybreach

securitybreach

    CLI Phreak

  • Forum Admins
  • 23,889 posts

Posted 21 August 2018 - 09:37 AM

View Postwa4chq, on 21 August 2018 - 07:24 AM, said:

Cool.... here's mine.
Posted Image

Nice, love the beer entry :thumbsup:

View Postsaturnian, on 21 August 2018 - 09:19 AM, said:

How did you get it to print that beer info?

I think you can add a manual entry
Posted ImagePosted Image Posted Image
CNI Radio/G+ Profile/Configs/PGP Key/comhack π

"Do you begin to see, then, what kind of world we are creating? It is the exact opposite of the stupid hedonistic Utopias that the old reformers imagined. A world of fear and treachery and torment, a world of trampling and being trampled upon, a world which will grow not less but more merciless as it refines itself. Progress in our world will be progress toward more pain." -George Orwell, 1984

#21 OFFLINE   wa4chq

wa4chq

    Thread Head

  • Members
  • PipPipPipPipPipPip
  • 516 posts

Posted 21 August 2018 - 10:05 AM

Magic!
Posted Image

Posted Image
REGISTERED LINUX USER #547579


#22 OFFLINE   wa4chq

wa4chq

    Thread Head

  • Members
  • PipPipPipPipPipPip
  • 516 posts

Posted 22 August 2018 - 06:10 PM

View PostV.T. Eric Layton, on 19 August 2018 - 02:16 PM, said:

Interesting... I may have to give that command a looksee. :)

https://slackware.pk..._slack.txz.html
Tnx for the link to the slack pkg....which also is the link to pkgs.org which has slackware pkgs....cool.....  there used to be site I'd get slack pkgs from mid-2k.....they aren't around anymore...wonder if this is the new and improved?

Edited by wa4chq, 22 August 2018 - 06:15 PM.

Posted Image
REGISTERED LINUX USER #547579


#23 OFFLINE   V.T. Eric Layton

V.T. Eric Layton

    Nocturnal Slacker

  • Forum Admins
  • 21,508 posts

Posted 22 August 2018 - 07:14 PM

Check out Alien Bob's (Eric Hameleers) repo, too. He has tons of stuff in there...

http://www.slackware...en/slackbuilds/

Also, Robbie Workman's collection...

http://rlworkman.net/pkgs/

And...

http://slackware.uk/

Pfffffft! Build from source. HA!

Have FUN!

#24 OFFLINE   wa4chq

wa4chq

    Thread Head

  • Members
  • PipPipPipPipPipPip
  • 516 posts

Posted 22 August 2018 - 07:38 PM

I've seen Alien Bobs site but not the others....tnx

Posted Image
REGISTERED LINUX USER #547579


#25 OFFLINE   sunrat

sunrat

    Thread Kahuna

  • Forum Moderators
  • 5,679 posts

Posted 22 August 2018 - 08:13 PM

I've been testing new versions of inxi (test versions are called pinxi) in Debian User Forums recently. h-2 has been a busy beaver, first rewriting it from bash to Perl, and recently replacing lsusb parsing with reading straight from /sys .
Why is everyone posting screenshots? Code tags are easier to read. Anyway here's my old system which is my daily driver. I have a much newer, more powerful production/gaming system as well.

$ inxi -F
System:	Host: siduction-brain2 Kernel: 4.18.3-towo.1-siduction-amd64 x86_64 bits: 64
		   Desktop: KDE Plasma 5.13.2
		   Distro: siduction 17.1.0 Patience - kde - (201703051755)
Machine:   Type: Desktop Mobo: Gigabyte model: EP45-UD3R v: x.x serial: <root required>
		   BIOS: Award v: F3 date: 09/18/2008
CPU:	   Topology: Dual Core model: Intel Core2 Duo E8500 bits: 64 type: MCP
		   L2 cache: 6144 KiB
		   Speed: 2721 MHz min/max: 2000/3166 MHz Core speeds (MHz): 1: 2721 2: 2675
Graphics:  Card-1: NVIDIA GF114 [GeForce GTX 560 Ti] driver: nouveau v: kernel
		   Display: x11 server: X.Org 1.20.1 driver: nouveau
		   unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
		   OpenGL: renderer: NVCE v: 4.3 Mesa 18.1.6
Audio:	 Card-1: Intel 82801JI HD Audio driver: snd_hda_intel
		   Card-2: NVIDIA GF114 HDMI Audio driver: snd_hda_intel
		   Sound Server: ALSA v: k4.18.3-towo.1-siduction-amd64
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
		   IF: eth0 state: down mac: 00:1f:d0:9d:ea:18
		   Card-2: TP-Link TL-WN821N v3 / TL-WN822N v2 802.11n [Atheros AR7010+AR9287]
		   type: USB driver: ath9k_htc
		   IF: wlan0 state: up mac: f8:d1:11:14:03:eb
Drives:	Local Storage: total: 1.92 TiB used: 969.52 GiB (49.2%)
		   ID-1: /dev/sda vendor: OCZ model: VERTEX2 3.5 size: 107.13 GiB
		   ID-2: /dev/sdb vendor: Western Digital model: WD1001FALS-00J7B1
		   size: 931.51 GiB
		   ID-3: /dev/sdc vendor: Western Digital model: WD1001FALS-00J7B1
		   size: 931.51 GiB
Partition: ID-1: / size: 20.47 GiB used: 14.56 GiB (71.2%) fs: ext4 dev: /dev/sda2
		   ID-2: swap-1 size: 2.29 GiB used: 396.5 MiB (16.9%) fs: swap dev: /dev/sda3
Sensors:   System Temperatures: cpu: 49.0 C mobo: N/A gpu: nouveau temp: 31 C
		   Fan Speeds (RPM): N/A gpu: nouveau fan: 1290
Info:	  Processes: 156 Uptime: 2d 21h 49m Memory: 3.85 GiB used: 3.19 GiB (82.8%)
		   Shell: bash inxi: 3.0.20

registered Linux user number 324659  ||    The importance of Reading The *Fine* Manual! :D
Posted ImagePosted ImagePosted ImagePosted Image
For the things we have to learn before we can do them, we learn by doing them.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users